802-MC-P1-HL4 1/4 NPT, Male, Steel, PTFE Packing, 1-3/8 Phenolic Handle, Hard Seat Bleed Valve
If you are viewing on a smaller screen or with screen zoom, please use the horizontal scroll bar at the bottom of this table to see all information.
|SERIES||8||800/850 Series, hard seat/soft tip|
|CONNECTION SIZES||02||Hard seat 1/4" NPT||52||Delrin® soft tip 1/4" NPT|
|04||Hard seat 1/2" NPT||54||Delrin® soft tip 1/2" NPT|
|VALVE TYPES||MC||Male, Steel||MS||Male, Stainless Steel||MB||Male, Brass|
|STEM TIPS||T1||Non-rotating (316 stainless)||T5||Ball (440C stainless)**||T8||Ball (Monel)**|
|O-RINGS*||EM1||EPDM||KZ1||FFKM (Kalrez® 3018 or equivalent)||NB1||NBR|
|HANDLES||HL2||2-1/2" "T"**||HL4||1-3/8" Phenolic**||HL5||1-3/4" Phenolic**|
|HL3||1" Round knurled|
† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the "Pressure vs Temperature: Packing Style with Compatible Fluid" chart.
* Other o-ring materials available on request.
** For 800 Series only.
*** For 850 Series only.
Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are 1" round knurled handles (HL3) on brass, and 1-3/8" mini "T" handles (HL7) on stainless steel and steel.
The handle material will always match the material of the valve, unless otherwise specified. For example, the mini "T" handle (HL7) on the 802-MC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.
For NOSHOK Valves with Brass & Steel valve types:
Note: HTML is not translated!
Copyright 2021 Mass Measure - Authorized Distributor of Noshok Products - All Rights Reserved