NOSHOK 2604-FFS Hard Seat, 1/2 NPT Female x 1/2 NPT Female, 316 SS 2 VALVE Block & Bleed Manifold Valve NOSHOK List price: Original price was: $388.50.Current price is: $267.50.
Back to products
Noshok 3110-MFS, Soft Seat, Flange x 1/2 NPT Female, 316 SS 3 Valve Manifold -Noshok NOSHOK List price: Original price was: $555.00.Current price is: $399.99.
-29%
Click to enlarge

NOSHOK 3072-MFS 1/4 NPT, Male x Female, 316 SS, 3-Valve Double Block & Bleed, Hard Seat

Part Number: 3072-MFS

Date modified: Oct 13, 2023

Online Prices

NOSHOK List price: Original price was: $468.79.Current price is: $334.50.

12 in stock

Call Us if you need anything Else-888-509-0111
Warranty: 3 YR
Add to wishlist
Compare

NOSHOK 3072-MFS 1/4 NPT, Male x Female, 316 SS, 3-Valve Double Block & Bleed, Hard Seat

Home | Needle Valves | 3070 Series 3-Valve Double Block & Bleed, Hard Seat

 

3070 Series 3-Valve Double Block & Bleed, Hard Seat Needle Valves

 

 

  • Combines isolating and venting in a single valve, eliminating the need for
    tubing and fittings
  • Block valve isolates the downstream process fluids, and the bleed valve
    exhausts upstream fluids enabling instruments to be removed without
    disturbing the permanent piping installation on the bottom
  • The 1/4″ NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • 10,000 psi hard seat pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full open
    position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
Dimensions Options Print Catalog Page

 

ORDERING INFORMATION

SERIES 3 3-valve
SEAT 0 Hard seat
PROCESS CONNECTION 7 Block & bleed
CONNECTION SIZES 0 1/2″ NPT 2 1/4″ NPT
VALVE TYPES MFC Male-Female, Steel FMC Female-Male, Steel FFCR Female-Female, Steel, Right Vent
MFCR Male-Female, Steel, Right Vent EFMC Extended Female-Male, Steel EFFC Extended Female-Female, Steel
EMFC Extended Male-Female, Steel FMS Female-Male, Stainless Steel FFS Female-Female, Stainless Steel
MFS Male-Female, Stainless Steel EFMS Extended Female-Male, Stainless Steel FFSR Female-Female, Stainless Steel, Right Vent
MFSR Male-Female, Stainless Steel, Right Vent FFC Female-Female, Steel EFFS Extended Female-Female, Stainless Steel
EMFS Extended Male-Female, Stainless Steel

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 3070-FFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.

ORDERING INFORMATION – Additional Options

PACKINGS† P1 PTFE P2 Grafoil®
STEM TIPS T1 Non-rotating (316 stainless) T6 Ball (carbide) T8 Ball (Monel)
T5 Ball (440C stainless) T7 Ball (ceramic) T9 Regulating hard
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR
HANDLES HL1 1-13/16″ Mini “T” HL3 1″ Round knurled HL5 1-3/4″ Phenolic
HL2 2-1/2″ “T” HL4 1-3/8″ Phenolic

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.

*   Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8″ mini “T” handle (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 3070-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

Description

NOSHOK 3072-MFS 1/4 NPT, Male x Female, 316 SS, 3-Valve Double Block & Bleed, Hard Seat

Home | Needle Valves | 3070 Series 3-Valve Double Block & Bleed, Hard Seat

 

3070 Series 3-Valve Double Block & Bleed, Hard Seat Needle Valves

 

 

  • Combines isolating and venting in a single valve, eliminating the need for
    tubing and fittings
  • Block valve isolates the downstream process fluids, and the bleed valve
    exhausts upstream fluids enabling instruments to be removed without
    disturbing the permanent piping installation on the bottom
  • The 1/4″ NPT vent plug is located 90° to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance
    and reliability
  • 10,000 psi hard seat pressure rating @ 200 °F
  • Blow-out proof stem provides a secondary stem seal in the full open
    position
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE or Grafoil® packing optional
  • All stems are 316 stainless steel
  • All stem threads are rolled for strength and ease of operation
  • One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
  • Slotted spring pin to prevent accidental loosening
  • Vinyl dust cap for bonnet and stem (non-packing)
Dimensions Options Print Catalog Page

 

ORDERING INFORMATION

SERIES 3 3-valve
SEAT 0 Hard seat
PROCESS CONNECTION 7 Block & bleed
CONNECTION SIZES 0 1/2″ NPT 2 1/4″ NPT
VALVE TYPES MFC Male-Female, Steel FMC Female-Male, Steel FFCR Female-Female, Steel, Right Vent
MFCR Male-Female, Steel, Right Vent EFMC Extended Female-Male, Steel EFFC Extended Female-Female, Steel
EMFC Extended Male-Female, Steel FMS Female-Male, Stainless Steel FFS Female-Female, Stainless Steel
MFS Male-Female, Stainless Steel EFMS Extended Female-Male, Stainless Steel FFSR Female-Female, Stainless Steel, Right Vent
MFSR Male-Female, Stainless Steel, Right Vent FFC Female-Female, Steel EFFS Extended Female-Female, Stainless Steel
EMFS Extended Male-Female, Stainless Steel

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

To meet all of your specific application requirements, the following additional options are available for these needle valves. To order all or any of these options, simply add them to the part number as shown in the diagram below.
NOTE 1: The example shown includes ALL possible additional options. Please include ONLY the options required for your application when building your part number. (EXAMPLE: 3070-FFC-HL5)
NOTE 2: When a packing option is selected, an o-ring option is NOT available.

ORDERING INFORMATION – Additional Options

PACKINGS† P1 PTFE P2 Grafoil®
STEM TIPS T1 Non-rotating (316 stainless) T6 Ball (carbide) T8 Ball (Monel)
T5 Ball (440C stainless) T7 Ball (ceramic) T9 Regulating hard
O-RINGS* EM1 EPDM KZ1 FFKM (Kalrez® 3018 or equivalent) NB1 NBR
HANDLES HL1 1-13/16″ Mini “T” HL3 1″ Round knurled HL5 1-3/4″ Phenolic
HL2 2-1/2″ “T” HL4 1-3/8″ Phenolic

    Please consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.

† If a packing option is chosen, maximum pressure rating is 6,000 psi. Refer to the “Pressure vs Temperature: Packing Style with Compatible Fluid” chart.

*   Other o-ring materials available on request.

Please note that the standard o-ring in all the NOSHOK valves is FKM and the standard handles are block “T” handles (HL2) and bleed 1-3/8″ mini “T” handle (HL7).

The handle material will always match the material of the valve, unless otherwise specified. For example, the “T” handle (HL2) on the 3070-FFC will be steel. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.