Welcome visitor you can login or create an account.
Featured Products
Druck 23622P-KIT 600 PSI Pneumatic Hand Pump
SKU: List Price $667.00
Model: Mfg Part #: 23622P-KIT
Brand: GE Druck
Availability: Stock: 1
We accept purchase orders
Model: We accept purchase orders
Availability: In Stock
Roscid Technologies OxyTrans-1 OxyTrans Oxygen Transmitter
SKU: 0-10 ppm
Model: OxyTrans-1
Brand: Roscid Technologies
Availability: In Stock
Extech 380260 Autoranging Digital Megohmmeter
Model: 380260
Brand: Extech Instruments
Availability: Stock: 4
$249.00 $239.50
Welcome to Mass Measure

Purchasing or Have a Question  1-888-509-0111

Come Visit us in our Massachusetts Location

        Prices Might not be the final so call us

1-888-509-0111 to get  your price



-----------------All Orders are processed Immediately

Xentaur HDT-60 Dewpoint Transmitter

Xentaur HDT-60 Dewpoint Transmitter
Manufacturer: Cosa Xentaur-get 5% off
Model Number: HDT-60


Availability: In Stock

Ask a question about this product:

Your Name:

E-Mail Address:


Enter the code in the box below:

  Xentaur HDT-60 Dewpoint Transmitter

  • 76°F to 86°F (-60°C to 30° C)
  • Rugged, waterproof design
  • HTF Aluminum Oxide Sensor Technology
  • Loop-powered (2-wire)
  • Analog (4-20 mA) Output
  • Digital (HART Compliant) Output
  • Programmable Alarm Signal
  • Stainless Steel Housing
  • IP65 Rated Connector
  • Compact Design
  • Temperature Compensated Calibration
  • Suitable for installations at pressure or ambient

    The HDT uses a Xentaur Hyper-Thin-Film (HTF™) high capacitance aluminum oxide sensor with a measuring range of -76°F to 86°F (-60°C to +30°C) (dp). HTF™ sensors provide a degree of accuracy, speed of response and stability unavailable from instruments using conventional aluminum oxide or polymer sensors.

    Sensor model XTR-60 is designed to work in tough, high pressure and even in liquid applications. The sensor is nonaffected by condensation and water slugs; once dried, it will resume measurement without requiring recalibration.

    The model HDT is a HART compliant IP66/NEMA4X hybrid dewpoint transmitter, providing loop powered analog as well as a digital output. Housed in a 1.25"dia. stainless steel case it has an overall length of 5.68", including the standard industrial 9.4mm 4 pin connector. This makes the HDT the world's smallest dewpoint transmitter.

    The instrument draws 4-20mA from the power supply. The 4-20mA is linear to °C(dp) with an output resolution of 0.1°C(dp) or 0.25uA, whichever is greater. The output range is programmable.

    The instrument can supply a digital output by modulating the 4-20mA loop line. The interface is defined by HART. In the digital mode the HDT can be remotely operated and the dewpoint as well as temperature (and pressure if installed) can be read. In the digital mode multiple units can operate on the same loop cable as a multi-channel instrument. In this configuration each HDT draws only 4mA independent of the measured dewpoint

    The HDT provides a factory programmable dewpoint alarm signal through a digital output pin. Additionally, relays or external devices can be operated through the analog or digital loops.

    The HDT has two different thread types, which makes the upgrade of existing installations easy. The HDT connects through inexpensive two-conductor cables over long distances.

    The HDT transmitter uses a multipoint calibration table which provides temperature compensated dewpoint readings for temperatures from +14°F to +158°F (-10°C to +70°C) (t). Thus, the HDT provides accurate dewpoint measurements over its full range even under extreme temperature conditions, such as when installed outdoors or close to heat sources.

    Part Number Alternate P/N Temperature Range Price  
    HDT-60 HDT60 -76 to 86°F (-60 to 20°C) $1,350.00
    HDT-100 HDT100 -149 to 68°F (-100 to 20°C) $1,995.00

Leave some feedback about your product experience

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: